Screeding a Floor

At Self Build and Contract Floors Ltd, we specialise in floor screeding and the installation of underfloor heating.

Our Products 

 

The flowing screeds that we use are:


  • Lafarge Agilia Screed A Low Laitance/Thermoplane

      Agilia Screeding Guide

  • Bardon Highflow

      Bardon Highflow Data Sheet

  • Cemex Supaflo

      Cemex Data Sheet

  • Tarmac Truflow

      Tarmac Data Sheet

  • Hope Flow - Data Sheet (*Coming Soon*)

We also use various concretes depending on specific application:

  • Lafarge Agilia
  • Bardon Cemflow
  • Lafarge Artevia

We are stockists of the following primers and adhesives for use with Anhydrite/Calcium Sulphate based screeds:


  • GBLC Primer

      GBLC Primer Products

  • GBTA Tile Adhesive

        GBTA Adhesive


    • Bed depth Approximate Coverage

    • 3mm - 4.0m2
    • 6mm - 2.8m2
    • 10mm - 1.4m2

Engineered wood Adhesive:

      • Rewmar MS Polymer Adhesive is a flexible flooring adhesive that is suitable for the installation of any wooden floor to almost any subfloor. The 16kg product will cover approximately 16m2, 1m2 per kg of adhesive. It is packaged in one tub and ready to use.

For more information, contact Selfbuild & Contract Floors today.

 

Latest News

Underfloor Heating Installation

With decades of experience in installation of underfloor heating systems, the team at Self Build & Contract Floors will ensure that the job is completed to the highest possible standards while keeping disruption to a minimum

A lower temperature of water is used because the larger surface area does not need to emit as much heat per square metre as the use of radiators.

 


So just how does underfloor heating work?

We guide water from a heat source to circulates through pipes laid under the floor placed in a continuous loop setup. 

Pipes for each room run to and from the systems manifold which is located in an accessible and convenient location for the system

The pipes will then heat the entire floor, so no matter where you stand in the room, you will receive the exact same temperature.

 

So why choose underfloor heating?

The Underfloor heating systems from Selfbuild & Contract Floors Ltd provides warmth from the floor up. This is different from traditional heat sources (radiators) which heat the ceiling area first. 

They use a lower water temperature because the larger surface area does not need to give out as much heat per square metre.

This means that the boiler is consuming less fuel giving you lower annual running costs. 

Underfloor heating emits a greater proportion of radiant heat, away from traditional convected heat.

Except for small and discrete room thermostats controls, our underfloor heating systems are completely hidden, giving you less wasted wall space and more freedom to design your room. 

 

For more information about our underfloor heating installation services available throughout the UK, please do not hesitate to contact Self Build & Contract Floors today.

 

{loadposition gsb}

 

Contact Us

Address:
22 Robin Hood Chase
Stannington
Sheffield

S6 6FH

Tel/Fax:

0114 231 5937

Alt Tel:

Simon Wilson 07967 033375

Alt Tel:

Bevin Pilling 07896 598076